Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the convenience of gas cooktops but needs an oven for baking? Find a dual fuel cooker that gives you the best of both worlds.
Many experienced home chefs favor gas cooktops due to their superior temperature control and capacity to use advanced cooking techniques such as charcoaling. These powerhouse stoves can be costly though, especially if you require an additional gas hook-up as well as an electrician for installation.
What is a 13amp plug?
If you have a dual-fuel range cooker (also called a gas and electric oven) you'll need an outlet with 13 amps. The plug should be wired by a licensed electrician into the cooker ring.
This ensures the current flowing through the plug does not exceed the limit of safety, which could lead to an electrical fire. The plug has an electrical fuse that regulates the current. The fuse blows when the current flows through it beyond its capacity. This protects the appliance from an over-charge of electricity.
The fuse is rated 13 amps, which is shown on top of the plug. This is the maximum amount of current the plug could pass without damaging the appliance or causing heat to the socket. It is important to ensure that when replacing fuses, you always use the same amps as the original. If you replace the fuse with one of a different rating, then you run the risk of overheating the socket and possibly putting yourself and others in high risk.
A 13 amp fuse will be a ceramic type that is extremely durable and is able to withstand high temperatures produced by a range cooker. Ceramic elements are also fire-resistant, and is therefore a better option over other kinds.
There are a variety of ways to install a 13 amp plug. It may be wired to an existing live socket, and the flex is then connected to this by a screw or plastic jaw-type cord clamp. The plug should be put in place with a firm push and then tightened, ensuring that the cord clamp is secure.
Some plugs may include a wiring diagram on cardboard over the pins and these should be removed prior to connecting the wires. It is vital that the wires are cut to the correct length as leaving them too long can cause them to be crushed when the plug cover is replaced. The earth wire must be the longest one to ensure it is connected before the line and neutral pins.
How do I install an outlet with 13amps?
The vast majority dual cookers that use fuel in the UK are equipped with a 13 amp plug. This is important because ovens draw a significant current, and the standard plug sockets have a rating of 10 amps.
In general, new appliances should be fitted with plugs at the time of sale and this is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug installed and this is the reason for the problem.
The first step to take when connecting a cooktop to an existing plug socket is to check that the fuse rating in the fuse box is similar to that of the plug. This is very important as an incorrectly sized fuse could pose a risk.
It is also recommended to check that the fuse is completely seated into the cartridge, and there isn't any excessive movement. The next step is to prepare the flex that will be used. Remove the sheathing from the flex to expose the three conductors that are insulated within. Then, cut the sheathing near the point of entry to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors that are insulated. The nick should be large enough to allow the sheathing and cable to separate as the sheathing is pulled back. Finally cut off the excess sheathing and leave about 40mm over the flex end.
The flex is positioned over the plug and the earth terminal is placed at the top and live and neutral terminals at the bottom. The sheathing of each pin is removed using conductors in the colour of the wire as a guide. The internal cable is then fixed into the terminal using the cord grip. If the plug has a screw type cord clamp loosen it and pull back the insulation to reveal the copper conductors. Connect each insulated wire to the correct terminal by using the plug's channel. Begin with the earth conductor and then the neutral and finally, the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 230volts is 3kw. This is a significant amount of power, but the standard fuse that comes with a UK plug will not fail until the cable reaches a dangerous temperature. A damaged plug or socket can cause fire, so it's important to keep an eye on how much you are using, especially in the kitchen.
The ceramic fuses used in plugtops weigh around 25mm in diameter and are designed for 240V mains. They will feature a BS kitemark or similar marking on the side and contain sand. There are glass or plastic alternatives, but they shouldn't be used with a live plug or else you could blow up the fuse and possibly get electrocuted!
The majority of dual fuel range cookers sold in the UK require hard-wired and will not plug directly into a wall socket. They are usually connected via a separate cooker circuit which is only suitable for appliances with a maximum of 20 amps.
Check the ring circuit at your home using the fuse box, or ask an electrician nearby. You can ask them if the sockets are connected to the same ring or if they're distinct. They will also be able to tell you if there's an individual circuit that powers your oven.
When you can try these out looking to buy a brand new dual fuel range cooker, the size of your kitchen is a vital factor to consider. We offer a broad selection of cookers that can fit any space. Choose from compact 50-60cm dual fuel models or vast 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're after something different do not worry - we also have a great selection of electric and gas multi-functional cookers. These multi-functional appliances let you cook a variety of dishes, including pasta, casseroles and curries!
Explore our full range of Cookers in Currys on our website or visit us in store to take a look. We offer free delivery and installation at home on selected range cookers, and also flexible payment options. Our team is on hand to answer any questions you have. You can contact us via email or phone. Credit is subject to status, and terms & conditions apply.
What is the most draw for the switch on a cooker?
There is a lot of confusion about the maximum current draw for a cooker switch. The reality is that the majority of cookers are not designed to connect to an ordinary socket, but instead are wired hard and fed into a dedicated oven ring circuit. This is because they often draw more than 20 amps of power when both the electric oven and gas hob are in use.
So, you won't find a dual fuel range cooker that could be connected to a standard socket, as this could create a serious fire risk and would be in violation of electrical regulations. An experienced electrician will install any new electrical components to the kitchen cooker and ensure that the total load (both the oven and the hob) will not exceed the power capacity of that circuit.
The benefits of a dual-fuel range cooker are the receptive cooking power of a gas stove and the precise operation of an electric oven. They are adored by chefs as well as home cooks. Dual fuel range cookers are perfect for experimenting with various cooking techniques, like searing or charcoaling.
When purchasing a new range cook, you should consider several factors, including size, functionality, and price. Additionally, you'll be required to ensure that your home has an appropriate gas hook-up to the appliance. If you're unsure then it's advisable to have an Gas Safe engineer inspect your home prior to installing.
Currys dual fuel range cookers are available in a variety of models that will fit all budgets. From budget-friendly models from Indesit and Zanussi, to our own Essentials collection. If you are looking for something more advanced we have a selection of premium JennAir models, which feature many unique features.
If you are buying a brand new dual fuel range cooker, it's crucial to consult the owner's manual for specific information regarding the gas and electrical requirements. It is essential to ensure that your home has a gas hook-up suitable and you may have to have a plumber install this for you, if needed. range dual fuel cooker is also possible to require a cooker-ring circuit that is installed by a certified electrical engineer.